TIMKEN LSM240BR Insert Bearings Cylindrical OD

L:68 mm; Z:39.6 mm; A2:35.7 mm; T max.:100 °C; G:M6x1; s1:17 mm; Weight:0.63 kg; N:12mm; C0:7.88 kN; H:125 mm;

L2:16 mm; Weight:2.38 kg; L:144 mm; A2:35 mm; N1:19 mm; N2:49 mm; H1:102 mm; H:117 mm; S:19 mm; G:M6x1;

S:34 mm; Designation of bearing:UC316G2T04; Designation of housing:C316-; A:60 mm; B:86 mm; H:200 mm; s1:43 mm; A5:52 mm; A3:4 mm; C0:86.5 kN;

Maximum Speed:3940 rpm; Bolt Size:4 x M12; Note:This product line wa; Bearing - Housing - Seal:LSM55BRHKPS; Dimension N:6.571 in; Dimension L:4.6 in; Cor - Static Load Rating:25853 lbf; Dimension R:8.6 in; Cr - Dynamic Load Rating:23155 lbf; Dimension P:0.6 in;

Brand:SNR; d2:100.7 mm; Dynamic load, C:324 kN; Max operating temperature, Tmax:200 °C; k:3.5 mm; Y0:3.01; Characteristic rolling element frequency, BSF:6.37 Hz; rs min:2 mm; Number of lubrication holes:3; b:7.9 mm;

Z:58.9 mm; T max.:100 °C; Designation of housing:PE207N-; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; Designation of closed end cover:SCC207; T min.:-20 °C; N1:21 mm; H1:19 mm; Designation of bearing:UC207-22G2L3;

J:117 mm; Recommended tightening torque for set screw:3.7 Nm; L:80 mm; A:31 mm; L1:72 mm; T max.:100 °C; Weight:0.88 kg; e:18 mm; B:30 mm; S:8 mm;

Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):10; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Seals:ZZ (Double Shield); Bearing Part Number:6200; Shape:Bottom Mount; Number of Bearings:Single;

B:34 mm; s1:30.5 mm; T max.:200 °C; d:20 mm; B1:43.5 mm; S:17 mm; Designation of housing:F204-; A:25.5 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:EX204G2T20;

Recommended tightening torque for set screw:5.5 Nm; s1:16 mm; L:103 mm; Weight:1.27 kg; E:12.5 mm; H:47.6 mm; A:45 mm; Designation of open end cover:SCO207-35; H2:93 mm; Dz:80 mm;

T max.:200 °C; G:R1/8"; Designation of housing:FE211N-; C:43.55 kN; A1:15 mm; A2:64.5 mm; N:18mm; L:162 mm; C0:29.2 kN; Dz:110 mm;

Accessory:No Cover; Unit, Type:Insert Bearing Unit; Fit:J7; Unit, Type:Insert Bearing Unit; Grease Type:Grease for eatables; Diameter series symbol:Used for Light load; Accessory:No Cover; Pillow Type, Category:Narrow Width; Bearing Unit, Type:Pillow Type; Rolling Element Material:Stainless Steel;

Weight:106 lb; Seal Type:Felt Type; Cor - Static Load Rating:110381 lbf; Shaft Size:3-15/16 in; Support Type:Two-Bolt Plummer Blo; Dimension J:15.4 in; Ca - Axial Load Rating:5620 lbf; Housing Width:5.7 in; Bearing UPC:013992032331; Bearing Number:MSE315BR;

C90 - Dynamic Radial Rating (90 million revolutions)4:36700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; Design Units:Imperial; Aa - Cage-Cone Backface Clearance:5.6 mm; r - Cup Backface To Clear Radius2:3.30 mm; db - Cone Backface Backing Diameter:153.92 mm; Series:95000;

Brand:SNR; Mass:0.13 kg; Da max:47 mm; Characteristic cage frequency, FTF:0.4 Hz; Characteristic inner ring frequency, BPFI:5.42 Hz; rs min:1 mm; Min operating temperature, Tmin:-20 °C; f0:13.9; Nlim:6,100 rpm; Dynamic load, C:13.8 kN;