NTN 1318C3 Self Aligning Ball Bearings

s1:24.2 mm; C0:6.65 kN; B1:30.9 mm; Designation of bearing:ES204G2T20; Recommended tightening torque for set screw:5.5 Nm; d1:32.4 mm; d:20 mm; G:R1/8"; Z:64 mm; Designation of open end cover:SCOE204-20;

Designation of open end cover:SCO204-20; H2:64 mm; T max.:100 °C; C:12.8 kN; B:31 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:PAE204N-; d:20 mm; N:M8; A:32 mm;

Weight:1.61 kg; Designation of bearing:UC201-08G2; Z:17 mm; B:31 mm; H2:41 mm; A5:18.3 mm; C0:6.65 kN; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; H:78 mm;

d:49.21 mm; Designation of housing:FC210N-; A:40 mm; e:10 mm; s1:25.8 mm; G:M6x1; B:51.6 mm; S:19 mm; L:165 mm; Z:34 mm;

A2:58.4 mm; L:130 mm; J:184 mm; T min.:-40 °C; e:25 mm; d:50.8 mm; T max.:100 °C; Recommended tightening torque for set screw:16.8 Nm; S:22.2 mm; s1:27.8 mm;

d:10 mm; Mass:0.009 kg; B:6 mm; Characteristic outer ring frequency, BPF0:3.61 Hz; f0:14; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:5.39 Hz; Da max:20 mm; Radial clearance class:CN; Dynamic load, C:2.7 kN;

Dynamic load, C:8.2 kN; ra max:0.6 mm; Nlim (grease):23,000 rpm; Min operating temperature, Tmin:-25 °C; D:35 mm; Fatigue limit load, Cu:0.16 kN; Characteristic inner ring frequency, BPFI:3.92 Hz; Max operating temperature, Tmax:110 °C; Da max:31 mm; da min:14 mm;

Min operating temperature, Tmin:-60 °C; bearing material:High Carbon Chrome S; Noun:Bearing; bore type:Round; f0:14.3; Minimum Buy Quantity:N/A; Inventory:0.0; Mass:0.6 kg; D:100 mm; static load capacity:29200 N;

Cr:17.5 kN; rs min:0.3 mm; Max operating temperature, Tmax:120 °C; Brand:NTN; C:26 mm; Min operating temperature, Tmin:-20 °C; Radial clearance class:CN; Manufacturer Name:NTN; Dw:2 mm; k:2.5 mm;

Ship Weight:21.33 LB; Housing Product Type:SPECIAL DUTY; Seal Type:Grease Seal (Taper); UPC:782475040582; Shaft Attachment Type:TYPE C; Housing Series:107 SERIES (106 - 10; Bearing Insert Material:Steel; Grease Type:Mobilgrease XHP222; Brand:Baldor-Dodge; d:1.4375 in;

Characteristic outer ring frequency, BPF0:4.12 Hz; Characteristic rolling element frequency, BSF:5.49 Hz; Nlim (grease):27,000 rpm; Characteristic inner ring frequency, BPFI:5.88 Hz; Fatigue limit load, Cu:0.07 kN; da min:14 mm; Characteristic cage frequency, FTF:0.41 Hz; Radial clearance class:CN;

N1:19 mm; H2:62 mm; H:30.2 mm; Designation of bearing:ES202G2T20; G:M6x1; T max.:200 °C; S:6.5 mm; N:13mm; C:9.55 kN; Z:58.4 mm;

B:49.2 mm; A1:32 mm; H1:14 mm; B1:62.7 mm; L:130 mm; N:M16; G:M6x1; Designation of housing:PA210-; s1:42.9 mm; C:35.1 kN;

Precision Class:ABEC 1 | ISO P0; Characteristic rolling element frequency, BSF:15.23 Hz; da min:79 mm; Static load, C0:12.9 kN; Snap Ring:No; Harmonized Tariff Code:8482.10.50.68; Max operating temperature, Tmax:110 °C; Inner Race Width:0 Inch | 0 Millimete; Product Group:B00308;

A:41.6 mm; L:116 mm; B:51.6 mm; C:35.1 kN; C0:23.2 kN; Dz:100 mm; Designation of bearing:UC210-30G2; T max.:100 °C; A1:13 mm; Recommended tightening torque for set screw:16.8 Nm;