Home>Products>IKO Bearing>IKO CFE24BUUR Cam Follower and Track Roller - Stud Type
IKO CFE24BUUR MODELS
Need a CAD or 3D Model?
IKO CFE24BUUR Cam Follower and Track Roller - Stud Type
category
IKO Bearing
IKO CFE24BUUR Bearing SPECIFICATIONS
What 3.7 Nm Recommended tightening torque for set screw is IKO CFE24BUUR Cam Follower and Track Roller - Stud Type in mechanical engineering? IKO Bearing Manufacturing 139 mm L Service . Upload your CAD file for an Machinery Parts 14.3 mm S instant.
- IKO
CFE24BUUR
- 3.7 Nm
- 139 mm
- 14.3 mm
- 24.5 mm
- 17 mm
- 0.8 kg
- 67.8 mm
- PLE205-
-
Machinery Parts2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
IKO CFE24BUUR Cam Follower and Track Roller - Stud TypeFrequently bought together
- 3.7 Nm
- 139 mm
- 14.3 mm
- 24.5 mm
- 17 mm
- 0.8 kg
- 67.8 mm
- PLE205-
- 36.5 mm
- 25.4 mm
IKO CFE24BUUR IKO CFE24BUUR Cam Follower and Track Roller - Stud TypeCompare similar products
IKO CFE24BUUR bearing Size Chart (mm/inches) | |
---|---|
Series | 98000 |
Cone Part Number | 98316 |
Cup Part Number | 98789D |
Design Units | Imperial |
Bearing Weight | 36.79 lb |
Cage Type | Stamped Steel |
Ab - Cage-Cone Frontface Clearance | 0.24 in |
d | 3.1496 in |
D | 7.875 in |
B - Cone Width | 1.9375 in |
C - Double Cup Width | 3.1581 in |
T - Bearing Width across Cones | 4.5625 in |
R - Cone Backface To Clear Radius1 | 0.14 in |
r - Cup Frontface To Clear Radius2 | 0.090 in |
db - Cone Backface Backing Diameter | 4.37 in |
Da - Cup Frontface Backing Diameter | 7.41 in |
Aa - Cage-Cone Backface Clearance | 0.31 in |
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3 | 28100 lbf |
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4 | 189000 lbf |
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5 | 48900 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 30400 lbf |
K - Factor7 | 0.92 |
e - ISO Factor8 | 0.63 |
Y1 - ISO Factor9 | 1.07 |
Y2 - ISO Factor10 | 1.59 |
G1 - Heat Generation Factor (Roller-Raceway)11 | 203 |
G2 - Heat Generation Factor (Rib-Roller End) | 37.4 |
Cg - Geometry Factor12 | 0.12 |
IKO CFE24BUUR INTERCHANGE
IKO Bearing Part series CFE24BUUR is a potential replacement for these common bearing part numbers:
CFE24BUUR
CFE24BUUR
CFE24BUUR
CFE24BUUR
CFE24BUUR
CFE24BUUR
CFE24BUUR
CFE24BUUR
Contact Us

- Machinery Parts
- Address6740 Kitimat Road, Mississauga, Ontario, L5N 1M6, Canada
- Phone(Working Time)821-5628
- Fax
IKO CFE24BUUR Technical Articles
Can a bad wheel bearing cause negative camber? |
How do you measure a pillow block bearing? |
How long can I drive on a noisy wheel bearing? |
IKO Bearing CATEGORIES
- Vickers D Series Valves
- Vickers Six Way Solenoid Valve
- Vickers Ten Way Solenoid Valve
- Vickers Coil
- Vickers Cartridge Valve Coil
- Vickers Proportional Valve Coil
- Vickers Overflow Valve Coil
- Vickers Superposition Valve
- FAG Bearing
- IKO Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- Timken Bearing
- DODGE Bearing
- Timken Bearings
- REXROTH Check valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valves
- REXROTH Throttle valves
- REXROTH Directional spool valves
- REXROTH Valves
- REXROTH Pressure relief valve
- REXROTH HY-CHECK VALVE
- REXROTH Pressure reducing valve
- REXROTH Throttle check valve
- REXROTH Directional poppet valves
- Timken Hm212049 Bearing
- SKF 6203 Bearing Price
- 22220 E Bearing
- Fy511m Bearing
Customers Who Viewed IKO CFE24BUUR Bearing Also Viewed
0.866 Inch | 22 Millimeter x 1.142 Inch | 29 Millimeter x 0.591 Inch | 15 Millimeter IKO TA2215Z Needle Non Thrust Roller Bearings
1.125 Inch | 28.575 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.25 Inch | 31.75 Millimeter IKO BA1820ZOH Needle Non Thrust Roller Bearings
1.378 Inch | 35 Millimeter x 1.575 Inch | 40 Millimeter x 0.61 Inch | 15.5 Millimeter IKO IRT3515 Needle Non Thrust Roller Bearings
IKO CRH64VBUU Cam Follower and Track Roller - Stud Type
IKO PHS30 Spherical Plain Bearings - Rod Ends