DODGE WSTU-S2-115RE Take Up Unit Bearings

B:60.30 mm; Oil Speed Rating n2:3000 rpm; Basic Dynamic Radial Load Rating C:178000 N; Basic Static Radial Load Rating Co:166000 N; Grease Speed Rating n1:2000 rpm; d:100.000 mm; D:180.0000 mm; Sealed Speed Rating n3:2000 rpm; Accessories:Two Shields; Fillet Radius ra:2.00 mm;

G:M 150x2; d3:180 mm; B:24 mm; d:150 mm; Hydraulic nut:HMV 30 E; B4:26 mm; B1:111 mm; Lock nut:KML 30; d1:135 mm; Mass adapter sleeve assembly:4.7 kg;

w:90 mm; d4 ≈:105 mm; Basic dynamic load rating C:1140 kN; r1 min.:1 mm; Basic static load rating C0:655 kN; dk:105 mm; h1:295 mm; B:55 mm; l3 min.:85 mm; α:5 °;

Grease Speed Rating Open/Shielded n1:3200 rpm; d:130.000 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Accessories:Shield & Seal; Sealed Speed Rating n3:2000 rpm; Basic Dynamic Radial Load Rating C:106000 N; D:200.0000 mm; Fillet Radius ra:2.00 mm; B:33.00 mm; Basic Static Radial Load Rating Co:10

Fillet Radius ra:2.00 mm; D:190.0000 mm; Basic Dynamic Radial Load Rating C:186000 N; B:65.10 mm; Grease Speed Rating n1:1800 rpm; Basic Static Radial Load Rating Co:180000 N; Sealed Speed Rating n3:1800 rpm; Oil Speed Rating n2:2800 rpm; Accessories:No Shield, no Seal,; d:105.000 mm;

Adapter sleeve assembly:SNW 30x5.1/4; Housing:SAF 530; H:320.675 mm; Ca:82.804 mm; Bearing limiting speed:3000 r/min; Mass pillow block:91.6 kg; J min.:431.8 mm; P150°:80.1 kN; S:4.763 mm; RG:3/4 NPT;

Cap bolt, size:M 36x240; P90°:3600 kN; Adapter sleeve:OH 3076/13.15/16 H; Da:560 mm; Oil seal:2 x TSD 3076/13.15/1; Ca:180 mm; s:24 mm; J1:220 mm; A:395 mm; H1:340 mm;

Calculation factor e:0.21; Calculation factor Y2:4.8; Reference speed:380 r/min; B:212 mm; Da max.:892 mm; D:920 mm; Limiting speed:670 r/min; Ba min.:22 mm; d2 ≈:727 mm; D1 ≈:839 mm;

Calculation factor fHC:1; d2:52.6 mm; Static axial stiffness, preload class C:73 N/µm; Calculation factor f2D:1.15; Calculation factor f2A:1; Basic static load rating C0:9.5 kN; Static axial stiffness, preload class D:103 N/µm; Static axial stiffness, preload class A:40 N/µm; Calcu

D:85.0000 mm; Basic Static Radial Load Rating Co:32500 N; B:19.00 mm; Fillet Radius ra:1.00 mm; d:45.000 mm; Accessories:Two Shields & Snap-R; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; Basic Dynamic Radial Load Rating C:39300 N;

C:66.675 mm; da min.:95.9 mm; r1 min.:1 mm; d:88.9 mm; ra max.:1 mm; rb max.:1 mm; d1 ≈:109.22 mm; Material constant KM:330; D:139.7 mm; Specific dynamic load factor K:150 N/mm²;

Mass inner ring:0.059 kg; r, r1,2 min.:0.3 mm; d:30 mm; F:35 mm; B:30 mm;

Grease Speed Rating Open/Shielded n1:20000 rpm; Basic Static Radial Load Rating Co:3400 N; B:11.00 mm; Oil Speed Rating Open/Shielded n2:26000 rpm; Accessories:Two Shields; Grease Speed Rating n1:20000 rpm; Sealed Speed Rating n3:15000 rpm; d:10.000 mm; Basic Dynamic Radial Load Rating C:8060 N; D:3

P60°:61.4 kN; Da:150 mm; J1:53.975 mm; Adapter sleeve assembly:SNW 17x2.15/16; R2:22.225 mm; PG:1/8 NPT; H1:95.25 mm; R1:53.975 mm; Cap bolt recommended tightening torque:149.1 N·m; P150°:20.9 kN;

Fillet Radius ra:0.30 mm; Accessories:One Shield; D:26.0000 mm; Basic Dynamic Radial Load Rating C:2250 N; Sealed Speed Rating n3:16000 rpm; Oil Speed Rating Open/Shielded n2:30000 rpm; Grease Speed Rating Open/Shielded n1:24000 rpm; Basic Static Radial Load Rating Co:1460 N; B:5.00 mm; d:17.000 mm;